flex

flex

Shaped pads

Double wetness indicators show when the pad is ready to be changed

A coloured strip running along the pad indicates its absorbency

The soft acquisition layer promotes the fast passage of urine through to the inside of the pad and keeps the skin feeling dry

Anti-leak cuffs ensure all liquid is absorbed directly into the pad

Euron® Flex shaped pads are suitable for use with a wide range of types and levels of incontinence. Correct fitting is essential to get the best performance from the product and ideally these pads should be used in conjunction with Euron® Net fixation pants. Technically advanced, Euron® Flex shaped pads feature a white textile backsheet with double wetness indicator, anti-leak cuffs to minimise the risk of side leakage and a multi-layer absorption core incorporating super absorbent powder (SAP) designed for fast absorption and dryness.

Seven absorbencies are available enabling the management of moderate to heavy incontinence at all times. The absorbency of the pad is identified by a colour coded strip and the Euron® Quick Absorption Scale™.

How to Use

Standing

Unfold the pad and halve it length ways to activate the anti-leak cuffs and to form a gully.

Put on the net pants. Completely unfold the front side of the pad, the diamond to the fore, and slide the rear of the pad between the legs, front to back. Position the upper edge of the fluffy padding slightly below hip level. Smooth the pad over the abdomen and buttocks.

Pull up the pad-holding pants as far as possible: first the front and then the back.

Check that the pad is correctly positioned and is not too tight. Make sure that the pad remains closely fitted at the groin and that the skin creases are not squeezed under the elastics.

How to Use Standing

Lying

Unfold the pad and halve it length ways to activate the anti-leak cuffs and to form a gully. Turn the patient on their side, their back turned to you.

Put on the net pants. Completely unfold the front side of the pad, the diamond to the fore, and slide the rear of the pad between the legs, front to back. Position the upper edge of the fluffy padding slightly below hip level. Smooth the pad over the abdomen and buttocks.

Pull up the pad-holding pants as far as possible: first the front and then the back. Now turn the patient on their back.

Check that the pad is correctly positioned and is not too tight. Make sure that the pad remains closely fitted at the groin and that the skin creases are not squeezed under the elastics.

How to Use
Absorbency QAS Colour Pack Count
Ultra 28
Ultra Plus 28
Extra 28
Super 28
Extra Plus 28
Super Plus 28
Maxi Plus 28

Download

Euron Flex Product Overview

Product sheet Euron® Flex

About us Environment & Sustainability Products Info. centre Contact us
How to get your Euron® products About incontinence FAQs